10
nrgSMART Integrated Controller
Amphenol Network Solutions
All rights reserved. 4.16.2021 151881 A0
509.926.6000
— amphenol-ns.com
7. Two nrgTEMP connectors are available on the panel and accept optional nrgTEMP probes.
8. The dry contact alarm terminals accept typical wire-wrap terminations. As an alternative to wire wrap, the
three pins are spaced to accept a TE Connectivity insulation displacement connector,
(part number 3-640428-3), for customers without wire-wrap tools.
2.3 Parts & Accessories
The following tables list optional and replacement items for the nrgSMART components of the panels.
Accessories:
Part Number:
nrgSMART Temperature Sensor, ACC, 6ft
nrgTEMP
nrgNET cable (
nrgSMART: ACC,nrgNET CABLE,UN-TERMINATED,10FT
)
nrgNET-10
nrgNET cable (
nrgSMART: ACC,nrgNET CABLE,UN-TERMINATED,50FT
)
nrgNET-50
nrgNET cable (
nrgSMART: ACC,nrgNET CABLE,500FT SPOOL
)
nrgNET-500
Replacement Components:
Part Number:
Replacement nrgNET 5-pin connector (
TERM BLOCK:RCPT,1X5)
141431
Replaceable Alarm Card, nrgSMART
307710-1
Replaceable Controller Card, nrgSMART
400822
Replaceable Sensor Card, nrgSMART
307607
Faceplate for Sensor Card, nrgSMART
E2
Faceplate for Controller Card, nrgSMART
E2
SENS to CTRL conversion components:
Part Number:
Replaceable Controller Card, nrgSMART
400822
CTRL to SENS conversion components:
Part Number:
Replaceable Sensor card, nrgSMART
307607
Section Three: Notices (nrgSMART Versions)
3.1 FCC Class A Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with limits for Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
