Amphenol BLD7754-PTE, Инструкция по эксплуатации

Страница: 16 / 30

INS7750 Rev. A
9
Protimeter Hygromaster2 Instruction Manual
4.4 Logging - Selection and Use
The Hygromaster2 supports both continuous and manual logging.
4.4a Manual Logging
If is pressed for 1.5sec at any of the measurement screens, the data and
Timestamp a
t that instant will be logged and a
RECORD SAVED
message
will be displayed on the bottom bar.
4.4b Continuous Logging
Continuous logging is used to sample and store data continuously.
Continuous logging is enabled either by setting logging parameters through
the Keypad or through a PC using
Logging Software
. (see
Section 4.7g, “Set
Logging Parameters (Optional PC Logging Software Required)”, on page 19.)
After the logging parameters are saved, logging starts after the START
AFTER
minutes have elapsed. The logging icon is displayed on the
top left corner of the screen while logging is active.
When logging is in progress, an option to stop logging is provided under
the SETTINGS menu. Logging can be stopped either by selecting SELECT
MODE -> SETTINGS -> STOP LOGGING in the instrument, by clicking STOP
LOGGING in the Logging Software or when the instrument is turned OFF.