Amphenol 125GMT Series, Руководство по установке

Страница: 7 / 26

7
125GMT
Amphenol Network Solutions
All rights reserved. 3.18.20 150566
509.926.6000
— amphenol-ns.com.com
This panel accommodates Cooper Bussmann and Littelfuse GMT fuses. The 125GMT10 and 125GMT15 have
positions for 20 or 30 GMT fuses, respectively. The panel is UL rated using 20A GMT fuses with a maximum
continuous output load of 14A. GMT fuses are sold separately. See amphenol-ns.com to order GMT fuses.
Sides A and B are electrically isolated including the alarm card, which contains power and GMT fuse status
relays with dry, Form-C contacts. The contacts are connected to wire-wrap pins for connecting to external
visual/audio alarms. Pins can also mate to a TE Connectivity 3-640428-3 connector. The alarm card also
controls the four indicator LEDs on the front panel.
The feed inputs are horizontal and accommodate dual-hole lugs. The input terminals are studs. This panel is
available with standard terminal block outputs or connectorized outputs. All input, output and alarm terminals
are within the panel.
For the terminal block configurations, the outputs are staggered to accommodate waterfall cable management.
Outputs accommodate single-hole lugs and the output terminals are screws.
For the connectorized output configurations, the output cables exit straight back from the panel. The outputs
accommodate connectors that are easily assembled during installation.
The ground terminals can accommodate either dual-hole or single-hole lugs. The ground terminals are bolt
connections on the sides of the panel, near the rear, and on the bottom of the panel, near the center rear. Only
one ground connection is required.
Fig. 1-3: 125GMT10-C front view
Fig. 1-4: 125GMT10-C rear view