Parts Identification
1. PAGING MICROPHONE INLET
2. TOUCH SCREEN
3. GOOSENECK MICROPHONE
4.OUTPUT CONNECTION
5. POWER SWITCH
Switch for 24V power to the unit.
8. PAGING MIC CONNECTION (EX2800)
Connect to the paging mic via this RJ45 connector. For pin configuration, refer to the diagram.
6. DATA / AUDIO OUTPUT (EX2800)
7. DATA / AUDIO INPUT LINK / DC SUPPLY (EX2800)
PD1900 | TOUCH SCREEN PAGING MICROPHONE
PAGE 3
XLR inlet for gooseneck microphone. Use only condenser microphone supplied or those operates under 3 to 9 V.
7” capacitive touch screen colour panel with 800 x 480 resolution.
This detachable condenser mic comes with illuminated ring when the mic is in active mode and ready for paging.
Connect the RJ45 cable to EX2800 for power, data and audio. If the paging mic is located near the decoder at the rack (within
50m), the cable can be connected directly to TD6240 / TD6080 / MxP2288 without using EX2800.
Data and audio are linked to TD6240 decoder unit using 2 pair screen cable. Please refer to ‘ Connecting the Unit’ for detailed
connection diagram.
Data and audio from other EX2800 (if any) are fed to this port forming a circuit. This connection is applicable only if multipoint
paging setup is established. Use a DC24V power adaptor supplied for powering the unit.
