Page 10
PA2000 Series | Power Amplifier
Due to our continuous product improvement policy, we reserve the rights to change the above specifications, features and artwork
without prior notice.
While every care was taken to ensure the data produced in this manual is correct at time of printing, we apologize if there were to be
any error that may have been unintentionally presented or omitted.
Technical Specifications
PA2240
420VA (1.75A)
14.5A
0.25A
240W
31V
42 Ohm
13.3
PA2120
280VA (1.3A)
8A
120W
22V
83 Ohm
12
PA2360
560VA (2.3A)
19A
0.3A
360W
38V
27 Ohm
16.2
PA2480
700VA 240V AC
24A
0.32A
480W
43.8V
20 Ohm
18.2
PA2060
120VA (0.4A)
2.9A
60W
15.6V
167 Ohm
9.4
Power requirement
Power consumption (240V AC)
Current consumption (24V DC)
Standby current (24V DC)
Input signal
Input gain controls
Rated output (100V, RMS)
4 Ohm output voltage
Output impedance (max load)
Frequency response
S/N ratio
THD + N
Protections
Cut off temperature
Cooling system
Indications
Dimensions (W x H x D)
Net Weight (kg)
220 / 240V AC or 24V DC back up supply
1V / 10K Ohm; balanced via XLR female
-40 to 0 dB
70Hz - 15 KHz @ 1KHz +/-3 dB
>70 dB @ 1 KHz, 1V
<0.18 %
Thermal, Short circuit, Overload, Fuse
75 Deg C
Auto temperature controlled fan speed
LED : Power, Signal level
482 x 88 x 345 mm
0.2A
Recommended AC Fuse Rating Replacement
We recommend that slow fuses to be replaced with the following ratings to avoid premature fuse disconnection as well as to protect
the internal circuitry slow blow fuses are preferred.
PA2060
PA2120
PA2240
PA2360
PA2480
3A
4A
5A
6A
7A
