PAGE 5
MA2000 SERIES | MIXER AMPLIFIER WITH 3 ZONE OUTPUT
Use the right connector for the appropriate
BGM source. At any one time, only one jack
shall be connected to the inputs of the same
channel to avoid interference. Also, please
switch to the right input level position for the
correspondence input source.
Very often BGM source shall have stereo
outputs whereas the mixer amp has only
mono input. Therefore, use either one output
of the BGM source to connect to the input. To
obtain better result of music stereo effect, use
a combiner jack (stereo to mono) before
inserting to the mixer amplifier.
Switch to the appropriate
input level attenuator. ie.
LINE for BGM source.
RCA JACK
STEREO PHONE JACK
Balanced input source
(Line / Mic level)
MIC
LINE
LINE
Connecting BGM Sources
PHANTOM POWER SWITCH
Switch on when condenser microphone is used. In normal
usage, it is recommended that it is switched off
CH 1 and CH 2 are provided with phantom power
Two channels - 1 and 2 are provided with
switchable phantom power of 12V.
MIC
LINE
MIC
LINE
MIC
LINE
MIC
LINE
O N
Phantom Power
