iPX5500 | ETHERNET COMMUNICATION BOX
PAGE 5
Device Setup
Network Configuration
Unless required, you are recommended to change the IP
address only, leaving other setting such as port number as
default. Once the address has been changed to suit the
environment, click the “Save Changes” button.
Network Settings
IP Address
Application Settings
Subnet Mask
Gateway Address
Data Port
System Configuration
Application Setting:
Device Name: You can rename the device name.
Connection Mode: You can adjust the connection mode,
want to set auto or manual.
Discovery Interval: To set the time connection mode.
Low amount - Quickly connection to PMX
High amount - Will take a while before automatically find
the PMX and connect to it.
Server IP: To indicate the IP address of the which the
connected to.
Web Page Theme: You can choose the theme of the web
page.
Authentication:
You can alter the user name and pass-
word to avoid unnecessary access to the system.
Firmware Update:
You can update firmware version
via browser. ( See on the page 6 for detail )
Note:
Ensure Server IP is correctly set. If PMX II LAN is used as
the source, the Server IP shall correspond to the PC’s IP
address.
Application Settings
Device Name
Connection Mode
Discovery Interval
Web Page Theme
Server IP
Authentication
New User Name
Old Password
New Password
Confirm Password
Firmware Update
File
