iPX5101 | ETHERNET PAGING SERVER
PAGE 7
Device Setup Via Browser
System
Unit Configuration:
We can enter a meaningful
Device Name here, e.g. “BLK A Paging Server”.
The name will be shown in Device Info page.
Authentication:
You can alter the user name and pass-
word to avoid unnecessary access to the system.
Update Firmware :
Firmware is stored in the unit’s
memory. Should there be any updates available, use this
section to perform system upgrades accordingly.
Backup and Restore:
You can backup the configura-
tion and can reset the settings to default settings.
Device Name
BLK A Paging Server
Enter new username
Enter new password
Paging Configuration
Concurrent Paging:
Number of paging mic that
allow to page concurrently. Note that in order to allow
the paging mics to talk at the same time, multiple
iPX5155 (operate in Output Mode) serving different
zone ranges are needed to be present in the system.
Also, the zone ranges that the paging mics are
calling do not overlap. Disable this setting if we want
to allow only one paging mic to be active at a time.
Remap Zones:
(To be supported)
Enable Same Priority Override:
When
multiple paging mics with equal priority attempt to
page the same zone range, enable this setting shall
allow late caller to page first.
Note: Overlapped zone(s) are zone(s) that been
served by two devices. E.g. if Mic 1 is paging zone 1
& 2; Mic 2 is paging zone 2 & 3 then zone 2 is an
overlapped zone.
Concurrent Paging
