iPX5300 ETHERNET MUSIC CLIENT
Page 5
Device Setup Via Browser
System Configuration
Application Settings:
Music Server IP:
Enter iPX5200 Music Server IP address
here. If PMX is used as the source, the Music Server IP shall
be corresponding to the PC’s IP address.
Sync With Server:
If checked, whenever iPX5300 is
powered ON, the Volume, Bass and Treble levels shall follow
the levels configured in iPX5200.
Volume / Bass / Treble:
Volume / Bass / Treble level
can be adjusted here.
Group:
Group refer to default clients that are able to receive
streaming audio from a iPX5200 each time the iPX5200 is
reset or turned on.
Example:
On an iPX5200, enable Group 1 & 2;
On an iPX5300, Group 1 is checked,
then whenever the iPX5200 is turned on, the iPX5300 will be
able to play streaming music sending from the iPX5200. Any
clients that are not belongs to Group 1 or 2 will not play the
audio.
Device Name:
A meaningful device name like “Level 1
Music Client” can be entered here. The name will be reflected
in iPX5300 Info page.
Authentication:
You can alter the user name and pass-
word to avoid unnecessary access to the system.
Firmware Update:
Firmware is stored in the unit’s
memory. Should there be any updates available, use this
section to perform system upgrades accordingly. Refer to next
page (page 6).
Application Settings
Volume
Bass
Treble
Group
Device Name
Connection Mode
Music Server IP
Sync With Server
Web Page Theme
Authentication
New User Name
Old Password
New Password
Confirm Password
Firmware Update
File
No file selected
