iPA5060 / iPA5120 | ETHERNET POWER AMPLIFIER
PAGE 5
Device Setup Via Browser
Network Configuration
Unless required, you are recommended to change the IP
address only, leaving other setting such as port number as
default. Once the address has been changed to suit the
environment, click the “Save Changes” button.
Network Settings
IP Address
Subnet Mask
Gateway Address
Data Port
Application Settings
System Configuration
Application Setting:
For Application Settings. The default source
refers to the unit’s selected source every time it is turned on.
Device Name: You can rename the device name.
Connection Mode: You can choose Auto / Manual Setting.
Paging Server IP: To indicate the address of the iPA5060 / 5120 of
which the client is connected to.
Zone Range: Zones that is served by the client / unit.
Restricted zones: Zones that only allows high priority paging / siren.
Web Page Theme: You can choose the theme of the web page.
Audio:
You can setting the configuration target, volume and graphic
equalizer.
Authentication:
You can alter the user name and password to
avoid unnecessary access to the system.
Note:
Ensure Ethernet Power Amplifier is correctly set. If the paging source
is iPA5120 / 5060, the default IP address shall be 192.168.0.100.
Application Settings
Device Name
Paging Server IP
Web Page Theme
Connection Mode
Zone Range
Restricted Zones
Authentication
New User Name
Old Password
New Password
Confirm Password
Audio
Configuration Target
Volume
Graphic Equalizer
iPX Device
Auto
192.168.0.101
1
255
Dark
Paging
admin
192.168.0.100
255.255.255.0
192.168.0.1
3000
