POWER
SPEAKER
GND
REM
B+
Caution
This amplifier is not supplied
with internal fuse in itself.
Make sure you install in-line
fuse holder from
the terminal of battery.
POWER
SPEAKER
GND
REM
B+
Caution
This amplifier is not supplied
with internal fuse in itself.
Make sure you install in-line
fuse holder from
the terminal of battery.
POWER
SPEAKER
GND
REM
B+
Caution
This amplifier is not supplied
with internal fuse in itself.
Make sure you install in-line
fuse holder from
the terminal of battery.
6
+12V
), GND, REM Connection
(B+
GROUND
HEAD UNIT
12V BATTERY
Recommend fuse rating
(See the page 8)
SINGLE CONNECTION
DAISY CHAIN (LINKED) CONNECTION
Remote
turn on
MASTER AMPLIFIER
SLAVE AMPLIFIER
GROUND
HEAD UNIT
12V BATTERY
Recommend fuse rating
(See the page 8)
Remote
turn on
Keep GROUND of equal length. This drawing is for illustration purposes only!
We recommend using 12 AWG speaker cables to obtain increased performance.
Run 12 AWG speaker cables from your speakers to the amplifier’s mounting location
Keep the speaker cables seperate from the power cables and and the amplifier’s input cables.
Use grommets where the cables have to penetrate the vehichle’s chassis.
Connect the speaker wires according to the terminals on each speaker.
Strip 1cm, 3/8" of insulation of the end of each cable and twist the cables strands together tightly.
Make sure there are no stray strands that might touch other cables or terminals and cause a short circuit.
Crimp spade plugs over the cable ends or tin the ends with solder to provide a solid terminal.
Connect the cable ends to the amplifier as shown in the speaker wiring diagram.
(Model : AA-2000.1D / AA-3800.1D)
