Amped Wireless HighPower AC1750, Руководство по установке

Страница: 15 / 64

Basic Setup Wizard
Confirm that Bridge Mode is the mode that you wish to configure
and Click
Next to begin.
Scan for a Source Network to Connect to and Bridge
Click
Scan to find available networks. Select the Source Network
that you wish to connect to and bridge.
Note: It is recommended that you select a Source Network with a
signal strength greater than 70% for the most reliable connection.
Poor signal connections may cause slow speeds or dropped
connections.
Click
Next to continue.
Note: If you do not see your desired Source Network, click Scan
again, or move the Network Bridge to another location and Scan
again as the Bridge may be out of range.