Maintenance
Troubleshooting
Cause
Solution
Error
Code
F01 Dead battery.
Charging voltage is too
high relative to battery.
Charging current is
higher than selected.
Check with a technician.
Check with a technician.
Verify the battery voltage and
select the correct charging voltage.
F02
F03
The charger is
overheating.
Make sure the vents are clear.
The charger will resume
charging when cooled.
Overtime Charging.
1. Selected charging rate
is too small for big battery;
2. The battery condition
is not good.
1. Select higher charging rate
and recharge;
2. Battery may be dead, check
the battery condition. Replace
battery if needed.
F04
F05
Always unplug and disconnect the charger before performing
maintenance on the unit. After each use, use a dry, lint-free cloth to
clean battery corrosion and other dirt from the clips, cords and
charger. Ensure that all components are in good working order.
Never open the charger as there are no serviceable parts inside the
unit. The charger should be stored in an upright position when not in
use. Store in a cool dry location.
Use the table below to troubleshoot problems before contacting
service personnel or your local dealer. If the problem continues after
troubleshooting, call your local dealer for assistance.
15
