Ampcontrol Pty Ltd
– ABN 28 000 915 542
OTS-EL USER MANUAL
MAG-205 Version 3
– DEC/19
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 18 of 23
A
P
P
R
OV
E
D
FOR
E
X
T
E
R
N
A
L
D
IS
TR
IB
U
T
ION
–
P
R
OP
E
R
T
Y
OF
A
M
P
C
ON
TR
OL
P
T
Y
LTD
–
N
O
T
T
O
B
E
R
E
P
R
OD
U
C
E
D
I
N
P
A
R
T
5
PRODUCT OPERATION
All tests are initiated wirelessly through Bluetooth from the AmpINTEL PowerSAFE OTS software. The
AmpINTEL PowerSAFE OTS Application software is compatible with Android versions 4.3 and above.
As the OTS application has been developed and tested on the Samsung Galaxy Tab A with Android
version 6.0.1, Ampcontrol can only guarantee compatibility with this device.
CAUTION!
Ampcontrol cannot guarantee correct operation of the AmpINTEL
PowerSAFE OTS application if a non-compatible smart device is
utilised.
During a test, the results will be displayed on the tablet and a report will be generated upon completion.
These test reports are stored on the tablet until the tablet gains network access. At this point the test
reports are uploaded to the dashboard, a site specific cloud based storage platform.
Once these reports have been uploaded, all reports except for the most recent will be removed from the
tablet. The most recent report is saved on the tablet because, at the beginning of each new connection,
the OTS-EL will check to make sure there are no discrepancies between the results obtained from the
last test and those stored on the tablet. If there are any differences the test report will be updated to
those stored in the OTS-EL. If the reports are different (i.e. the last test was conducted on a different
device) a new test report will be generated with the data stored on the OTS-EL. This is of particular use if
there were any issues with the tablet or Bluetooth connection during testing.
For more information on the operation on the OTS-EL Android Application or the Dashboard please refer
to the relevant user manual.
NOTE
The Bluetooth range is limited to a maximum of approximately three
metres (3m). This distance is an advised maximum, various factors
will influence the connection distance.
