IKDV01 Keypad Push Button System
Issue: R4 Date: 03/2020, ECN: 9436
IKDB003 R4
IKD Keypad Pushbutton System User Manual.docx
Page 5
2
General Safety
2.1
Personnel Safety Warnings
2.1.1
Relevant Personnel
Ensure all personnel directly responsible or involved with the installation, operation and maintenance of the
equipment reference this manual in conjunction with any relevant risk assessments to identify all foreseeable
hazards.
2.1.2
Safety Communication
All safety instructions and design requirements within this manual must be communicated to all users. These
requirements are necessary to identify and control any foreseeable risk associated with this piece of equipment. In
the event of any damage or malfunction that results in the potential to harm the health or safety of any person; the
owner/operator should notify the manufacturer immediately.
2.2
Safe Use of Equipment
Equipment supplied has been manufactured within the guide lines of the relevant Australian Standards and state
legislative requirements. Equipment identified within this manual has been designed for a specific intended purpose;
therefore any modification or damage must be reported to the manufacturer for repair.
The instructions within this manual must be observed as an aid towards achieving maximum safety during operation.
2.2.1
Changes to Equipment
Changes in the design and modifications to the equipment are not permitted
2.2.2
Equipment Knowledge
Experience with, or understanding of, this equipment is essential for the safe installation and removal of the
equipment. If in doubt, contact Ampcontrol immediately.
Mechanical and or Electrical installation, and maintenance of plant and equipment, must only be carried out by
appropriately trained, qualified and competent personnel.
2.3
Conditions of Conformity – IEC [Ex ia]
WARNING!
To comply with the Conditions of Certification, ensure full serviceable life of the product,
and avoid nullifying the warranty, it is essential to exercise great care with the
installation, use and storage of the System components. Failure to comply with the
Conditions of Certification (
) may seriously compromise the
integrity of the system and/or its components, and the consequence can be fatal. The
user must ensure that the “Conditions of Safe Use” outlined in the certificate are met or
the certificate will not be valid.
