Ampcontrol Pty Ltd
– ABN 28 000 915 542
GG2 DISPLAY USER MANUAL
GG2B023 Version 3
– JUNE/19
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 42 of 82
A
P
P
R
OV
E
D
FOR
E
X
T
E
R
N
A
L
D
IS
TR
IB
U
T
ION
–
P
R
OP
E
R
T
Y
OF
A
M
P
C
ON
TR
OL
P
T
Y
LTD
–
N
O
T
T
O
B
E
R
E
P
R
OD
U
C
E
D
I
N
P
A
R
T
Navigating the User Interface
The user interface is navigated via the magnetic keypad on the front of the GG2 Display, refer to Figure
43. The keypad requires the magnetic wand to activate the five magnetic reed switches located directly
beneath the orange symbols. The valid keypad events will vary according to the current menu selection.
The GG
2 Display’s keypad guide (Item 6 of Figure 42) illustrates which keypad events will be accepted
for the current menu selection. The dark segments represent valid keypad events while the lighter keys
represent invalid keypad events, refer to Figure 44.
Figure 43: Keypad Overview
Figure 44: Keypad Guide
6.1.1.1 Using the Magnetic Wand
For best results during operation of the GG2 Display, the display should be at eye level and the following
points should be observed:
To activate a button/switch:
o
Move the magnetic wand to the desired segment of the keypad whilst keeping the wand
approximately 5cm away from the display.
o
Move it in a direction perpendicular to the display until the keypad operation is registered.
A small amount of lateral movement is tolerable as long as other segments are not
crossed.
For consecutive button/switch events, it is important that the magnetic wand is moved far enough
away (approximately 5cm) from the keypad, such that the previous keypress is cleared, before
the next keypress is made.
ENTER
UP
DOWN
LEFT
RIGHT
Keypad Guide showing only the LEFT
key available
Keypad Guide showning only the LEFT,
RIGHT and ENTER keys available
