Locking the detector
The detector head should be locked into the base, particularly if it is installed at a height less than
3m above the
fl
oor level. The reason for locking is to deny unauthorised persons access to the base
terminals in order to prevent base malfunction.
Lock the detector with a hexagonal driver.
Commissioning and Maintenance
Fit all detector heads before switching on power. Commission in accordance with BS5839 Part 1.
Routine maintenance should be carried out to BS5839 Part 1.
+
EOL
Resistor
(8.2k
Ω
)
–
From
control
panel
Note: This Sav-Wire 2 base may be used
only with compatible control panels
REMOTE LED
+ R
+ ve
–R
EARTH
+ R
– ve
+ ve
–R
EARTH
+ R
– ve
+ ve
–R
EARTH
– ve
Sav-Wire base wiring diagram
Ampac
7 Ledgar Road, Balcatta, Western Australia 6021
Telephone: +618 9201 6100 Fax: +618 9201 6101
Email: [email protected] Website: www.Ampac.net
Apollo Fire Detectors Limited, 36 Brookside Road, Havant, Hants, PO9 1JR, UK
Tel +44 (0)23 9249 2412 Fax +44 (0)23 9249 2754
Email: techsales@apollo-fi re.co.uk Website: www.apollo-fi re.co.uk
