AMP Research PowerStep, Руководство по установке

Страница: 7 / 24

www.amp-research.com
7/3 IM7704 rev 07.02.5
A M P R E S E A R C H P O W E R S T E P
T M
– F O R D S u p e r D u t y
Torque bolts on mounting brackets as shown to 6ft-
lbs.
18
15
Slide mounting T-nut into position, Center board in
rail pocket. Tighten fasteners to 0 ft-lbs.
Using a 3mm socket Torque linkage bolts 4x (8) from
step 3 to 6 ft-lbs. Next use a 0mm socket, torque
linkage spacer bolt 2x (2) from step 6 to 8 ft-lbs. Once
linkages are tight cycle board to verify steps deploy
under own weight.
Attach motor to harness. Using a 4mm hex Torque
to 36 in-Lbs.
8
14
19
Start from rear of vehicle tighten brackets to the body of the vehicle. First Torque Button Head Bolts(0) to
6ft-lbs and then tighten Captive washer bolts(8) to 6 ft-lbs.
5
6
7
8
9