AMP Research Power Step 77121-01A, Руководство по установке

Страница: 9 / 13

www.amp-research.com 9/11 IM77121 rev 5.1.19
A M P R E S E A R C H P O W E R S T E P
T M
– J e e p W r a n g l e r J K
Lift carpet. Slit rubber grommet and pass trig-
ger wires through grommet in floor into pas -
senger compartment.
Remove passenger side front door sill.
Insert
Tighten
Strip 3/8”
Insert and
Tighten
Posi-Tap™ instructions
Route Violet wire under carpet to driver side
door sill and connect to violet wire coming
from door as shown. Note: For door removal
attach posi tap on chassis side of door
harness.
Remove driver side door sill and pull up carpet.
Use Posi-Tap connectors to connect Power Step
trigger wires to like colored wires in the factory
system as shown: Violet/White wire in loom coming
from front door, Violet/Yellow and Violet/Grey are
not used tape off ends. Note: For door removal
attach posi tap on chassis side of door harness.
5
13
1
17
5
5 18
1 15
1 16
14