AMP Research 75135-01A, Руководство по установке

Страница: 9 / 12

www.amp-research.com
9/10 IM75135 rev 07.30.19
A M P R E S E A R C H P O W E R S T E P
T M
– J e e p W r a n g l e r J L
Affix LED lamp (9) to LED Bracket (10) as shown. Affix LED light bracket assembly to rail. Mount front
light rearward of front linkage and mount rear light just forward of rear linkage.
Using supplied butt connectors, connect the lamp wires. Red
to Red, Black to Black. Once Crimped use heat gun to shrink
tube. Close and wrap conduit with electrical tape. Secure all
loose wires with cable ties. Pull lamp wires upward to avoid any
wire snagging.
Reinstall Fuses from Powerstep Wire
Harness.
18
1
5
14
13
On driver side, run Wire Harness leg down and along underside of the vehicle floor and frame
to front Drive Linkage. Connect harness to motor and secure harness with tie wraps. Route
remainder of wire harness towards rear linkage assembly for LED lights. Repeat step on
passenger side.
1 15
19
21
5
22
21
16
10
9
5