INSTALLATION & MAINTENANCE GUIDE
–4–
w w w. a m p l i g h t i n g . c o m
–4–
Wire Connections
3
Install Luminaire to Stake
2
[email protected] • 813.978.3900
–5–
INSTALLATION & MAINTENANCE GUIDE
Install Bulb
4
Install Lens
5
AMP
®
VariantPro Spotlight
AAL-1010-4-B-BZ
Clear away an area in the ground
at the wireway slot on top of the
stake. Lay the luminaire pigtail
into the wireway slot and attach
the luminaire onto the stake.
Tighten until snug.
Wireway Slot
Pigtail
Luminaire
Wire Connectors
Main Low Voltage
Supply Cable
Pigtail
Strip both leads from the luminaire pigtail. Using two wire connectors
(sold separately), connect the leads from the luminaire to the main
supply cable leads.
AMP
®
VariantPro Spotlight
AAL-1010-4-B-BZ
Insert the bulb with the correct
wattage and type marked on the
luminaire label.
CAUTION: Do not exceed maximum
wattage marked on luminaire label.
NOTE: DO NOT touch bulb with bare
hands. Use soft cloth to handle bulb.
Thread the lens onto the luminaire
and hand tighten until snug.
Bulb
Socket
Lens
Luminaire
