- 7 -
- 6 -
Install MR11 Bulb
6
Insert MR11 bulb with the correct
wattage and type marked on the
fixture label.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
MR11 Bulb
Socket
ROTATE
Install Lens
4
Place the lens back onto the
fixture body and rotate it until
it is secured properly.
Fixture Body
Lens
Install Glare Guard
5
Install the glare guard back
onto the fixture body and
secure with previously
removed set screw.
Fixture Body
Set Screw
Glare Guard
Using the provided Allen wrench,
loosen the knuckle and adjust
the fixture body to your desired
direction. Once your desired
direction is achieved, tighten the
knuckle into place.
ROTATE
Adjust Bulb Direction
6
Fixture Body
Allen Wrench
Knuckle
Remove the glare guard and the lens to expose the MR11 bulb and replace it
with the correct wattage and type marked on the fixture label. Then,
reinstall the lens and the glare guard.
IMPORTANT: MR11 bulb must be protected from moisture and dust at all
times. Always reinstall the lens and the glare guard when removed.
Install/Replace Bulb
AMP
®
EscherPro MR11 Spotlight
AAL-1023
INSTALLATION & MAINTENANCE GUIDE
w w w. a m p l i g h t i n g . c o m
[email protected] • 813.978.3900
