INSTALLATION & MAINTENANCE GUIDE
–6–
w w w. a m p l i g h t i n g . c o m
–6–
6
AMP
®
AggregatePro Spotlight
AAL-1013-XX-B-BZ
Install Stake
Board
Stake
Soil
Ground
Determine the desired location for
mounting the fixture. Hammer the
stake into the ground until flange
of stake is flush to grade. To avoid
damage to the stake, place a board
on top of the stake while hammering.
NOTE: If the ground is hard and the
stake is difficult to install, make a
crosscut in the ground using a flat
shovel.
7
Install Fixture to Stake
Fixture
Stake
Pigtail
Clear away an area in the
ground at the wireway slot
on top of the stake. Lay the
luminaire pigtail into the
wireway slot and screw the
fixture on to the stake. Tighten
until snug.
Wireway Slot
