INSTALLATION & MAINTENANCE GUIDE
–6–
w w w. a m p l i g h t i n g . c o m
–6–
Install Stake
1
Option 2: Stake Mount
AMP
®
120V Brass Flood Light with Knuckle (Constant Output)
AFL-40XX-LI-B-BZ
Determine the desired location
for mounting the stake. Hammer
the stake into the ground until
flange of stake is flush to grade.
To avoid damage to the stake,
place a board on top of the stake
while hammering.
Note: If the ground is hard and
the stake is difficult to install,
make a crosscut in the ground
using a flat shovel.
Board
Ground
Stake
Install Fixture Body to Stake
2
Pass the supply wires through
the center hole of the stake
and thread the fixture body
onto the stake. Hand tight-
en until snug. Clear away an
area in the ground and lay the
supply wires into the stake’s
wire exit.
Go to the Step 3 - Step 4 for
wiring connections and direc-
tion adjustment.
Ground
Supply Wires
Soil
Stake
Fixture Body
