AMP Lighting AAL-1012 Series, Инструкция по установке и обслуживанию

Страница: 4 / 5

- 6 - - 7 -
ROTATE
Install Lens
6
Place the lens back onto the
fixture. Align holes on both of
them and secure with previously
removed set screw. Hand tighten
until snug.
Adjust Luminaire Direction
7
Loosen the adjustment screw
at the joint and adjust the
luminaire to the desired
direction. Once the desired
direction is achieved, tighten
the adjustment screw.
ROTATE
Luminaire
Adjustment Screw
Remove the glare guard and the lens to expose the MR16 lamp and replace it
with the correct wattage and type marked on the fixture label. Then,
reinstall the lens and the glare guard.
IMPORTANT: MR16 lamp must be protected from moisture and dust at all
times. Always reinstall the lens and the glare guard when removed.
Install/Replace Lamp
Fixture
Set Screw
Lens
AMP
®
EcoPro MR16 Spotlight
AAL-1012
INSTALLATION & MAINTENANCE GUIDE
customersupport@amplighting.com • 813.978.3900
w w w. a m p l i g h t i n g . c o m