Amoul D-Tiger AII6000A Скачать руководство пользователя страница 5

Страница: 5 / 54

H-1.601.00024-A3.0

III

Product information

Product Name:

D-Tiger

Emergency Ventilator

Mode:

AII6000A

Manufacturer:

Ambulanc (Shenzhen) Tech. Co. , Ltd

Manufacturer address

：

3rd Floor, Block C, Building #5, Skyworth Innovation Industry

Park, Tang Tou 1st Road, Shiyan Town, Baoan District, 518108 Shenzhen,China

Warning

This device is not intended for home using!

Company Contact

Manufacturer: Ambulanc (shenzhen) Tech.Co., Ltd.

Address: 3rd Floor, Block C, Building #5, Skyworth Innovation Industry Park, Tang

Tou 1st Road, Shiyan Town, Baoan District, 518108 Shenzhen,China

Tel: +86-755-26072210

Fax: +86-755- 23016012

Website: http://www.ambulgroup.com

E-mail: [email protected]

EC-Representative: Shanghai International Holding Corp. GmbH(Europe)

Eiffestrasse 80,20537 Hamburg,Germany

Contact Pers.: Qiming Cheng

Telephone: +49-40-2513175

Fax: +49-40-255726

Preface

Manual Purpose

This manual contains the instructions necessary to operate the product safely and in

accordance with its function and intended use. Observance of this manual is a

prerequisite for proper product performance and correct operation and ensures

patient and operator safety.

This manual is based on the maximum configuration and therefore some contents

may not apply to your product. If you have any question, please contact us.

This manual is an integral part of the product. It should always be kept close to the

equipment so that it can be obtained conveniently when needed.

Intended Audience

This manual is geared for clinical professionals who are expected to have a working

knowledge of medical procedures, practices and terminology as required for

emergency rescue.

Illustrations

All illustrations in this manual serve as examples only. They may not necessarily

reflect the setup or data displayed on your ventilator.

Содержание D-Tiger AII6000A























































Результаты поиска

Содержание D-Tiger AII6000A

Отзывы:

Amoul D-Tiger AII6000A, Руководство пользователя, Страница: 5 / 54

Результаты поиска

Содержание D-Tiger AII6000A

Отзывы: