Hose Adaptor Options
SELECTION
Determine the size and position of the MPX valve to be installed. Within the various constraints imposed in
the application, the valve should be as generously sized as possible. Check that the valve can be positioned
such that the reset lever and, where applicable, the stop button will be easily and safely accessible. For types
with a remote manual stop, position the valve and select the cable length to give a reasonably straight cable
run between the MPX valve and the proposed stop button position.
Air Pressure
A clean, dry air supply is required. An air pressure of approximately 2 bar is required to close the valve.
Maximum air pressure must not exceed 10 bar.
203mm (8”) Bore Valves
Adaptor
To Suit Hose Bore
Part Number
mm (inches)
HAX-807
178 (7)
HAX-808
203 (8)
127mm (5”) Bore Valves
Adaptor
To Suit Hose Bore
Part Number
mm (inches)
HAX-501
89 (3
1
/
2
)
HAX-502
92 (3
5
/
8
)
HAX-503
95 (3
3
/
4
)
HAX-504
98 (3
7
/
8
)
HAX-505
102 (4)
HAX-506
105 (4
1
/
8
)
HAX-507
108 (4
1
/
4
)
HAX-508
111 (4
3
/
8
)
HAX-509
114 (4
1
/
2
)
HAX-510
117.5 (4
5
/
8
)
HAX-511
121 (4
3
/
4
)
HAX-512
124 (4
7
/
8
)
HAX-513
127 (5)
HAX-518
140 (5
1
/
2
)
HAX-523
152 (6)
Select the required length of the manual shut down cable
from the table . Alternative lengths may be available on
request. Also order push button assembly RBP-100.
Cable options
for use with “PUSH” button RBP-100
To suit valves MPX-302, MPX-502, or MPX-802
Cable part No.
Length (meters)
CLP-100
1.0
CLP-150
1.5
CLP-200
2.0
CLP-300
3.0
Select the required length of the manual shut down cable
from the table . Alternative lengths may e available on
request. Also order handle RTD-100.
Cable options
for use with “PULL” handle RTD-100
To suit valves MPX-303, MPX-503, or MPX-803
Cable part No.
Length (meters)
CLD-100
1.0
CLD-150
1.5
CLD-200
2.0
CLD-300
3.0
If the valve is to be fitted into a hose as opposed to flange mounted, suitable hose adaptors may be selected from the table
below for ordering with the valve.
76mm (3”) Bore Valves
Adaptor
To Suit Hose Bore
Part Number
mm (inches)
HAX-320
38 ( 1
1
/
2
)
HAX-322 44.5
(1
3
/
4
)
HAX-301
51 (2)
HAX-302
54 (2
1
/
8
)
HAX-303
57 (2
1
/
4
)
HAX-304
60 (2
3
/
8
)
HAX-305 63.5
(2
1
/
2
)
HAX-306
67 (2
5
/
8
)
HAX-307
70 (2
3
/
4
)
HAX-308
73 (2
7
/
8
)
HAX-309
76 (3)
HAX-314
89 (3
1
/
2
)
HAX-319
102 (4)
4
MPX DIESEL ENGINE SHUTDOWN VALVES
CE236 (9)
T: +44 (0)1284 715739
