AMOT 02GGH, Инструкция по установке, эксплуатации и обслуживанию

Страница: 61 / 84

61
Temperature Sensor 8060
OMMGGP00185 Rev 5 – MAY 2019
Section 9
Temperature Sensor 8060
Contents
Para Page
9.1 Description ............................................................................... 61
9.1.1 Identification of Model Number ......................................... 61
9.2 Installation ............................................................................... 61
9.3 Maintenance ............................................................................. 62
9.1 Description
The 8060A temperature sensor is ideal for use with the 8071D and 8072D PID
controllers and other PT100 applications. It is a 3 wire RTD with stainless steel
thermal well and IP54 aluminium connection head. It is able to use standard 3-
core cable and operates in the range –100 to 350
 C (-150 to 600  F).
9.1.1 Identification of Model Number
Example code 8060A 1 2 Code Description
Conduit Thread
Size and Torque
1 M20
2 PG 13.5
3 PG 16
4 1/2” NPT
Installation Thread
Installation Thread
2 1/2” BSP Tr
3 1/2” NPT
9.2 Installation
When installing the temperature sensor, comply with the following:
Position the sensor as close as possible to the point of control.
Ensure the sensor is positioned at least 6 pipe diameters in length from
any junction.
Ensure the end 40mm of probe is as close as possible to the centre of the
flow path.
Do not run cables in very hot areas which can cause cable failure and
inaccurate measurement.
Avoid installation in areas of high vibration.
Avoid installation into potential air pockets.
Position the sensor in an accessible location for future maintenance
access.
Use heat transfer compound in thermal well.