CHARGING INSTRUCTIONS
Before batteries are charged, you must check the cells’ compatibility.
1. Plug the micro USB cable into the MC1 and to your computer’s USB port or power ada-
ptor. When the charger has been properly plugged, the green LED will light.
2. To charge your battery, place it in the charger making sure that polarisation is correct.
Once the battery starts getting charged, the red LED will light.
3. After the battery has been fully charged, the green LED will light.
WARNING!
The XTAR MC1 charger can be only used to charge 3.6 / 3.7 V Li-ion cells of the follo-
wing sizes: 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 22650,
25500 and 26650.
Using any other type of cell may result in damage to the charger and the cell being
charged.
The charger must be stored in a dry and clean place.
The charger must not be disassembled – it can cause an electric shock or fire.
The charger must not be used if damaged.
Charging parameters input 5 V, 500 mA Constant Current (CC stage of charging) 500 mA
+/- 50 mA cut-off voltage 4.2 V +/- 0.05 V cut-off current
3
Содержание XTAR MC1
Страница 1: ...XTAR MC1 CHARGER user manual...
