10
s
ToppIng
p
ressure
W
asher
o
peraTIng
I
nsTruCTIons
If the chemical/soap injector was used, rinse with clean water.
Note:
Flush chemical line with new container and clean water
until discharge is clear.
Turn Pump Unit power switch to the “OFF” position.
Turn off the water supply.
Squeeze the trigger on the wand to relieve the system water
pressure and drain as much water as possible.
1.
2.
3.
4.
Follow this procedure each time the machine is stopped.
5.
Note:
Squeezing the trigger on the gun when you restart the unit
will reduce the startup load of the motor.
