User’s Guide
ACC-7725
Charging Cradle
Regulatory Information
All AML devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required. Any changes or
modifications to AML equipment, not expressly approved by AML, could
void the user's authority to operate the equipment.
Power Supply
Use only an AML approved power supply, output rated 12 VDC and
minimum 2.5A. The PWR-8050 Power Supply is certified to EN60950.
Disclaimer
AML reserves the right to make changes in specifications and other
information contained in this document without prior notice, and the
reader should in all cases consult AML to determine whether any such
changes have been made. The information in this publication does not
represent a commitment on the part of AML.
AML shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting
from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by
copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written
consent of AML.
No user serviceable parts. Do not use if unit is damaged.
FCC Declaration of Conformity
Product Name: Terminal Charger
Model Number: ACC-7725
Radio Frequency Interference Requirements
This equipment complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This equipment may not cause harmful
interference, and (2) this equipment must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a residential environment. This
equipment generates uses and can radiate radio frequency energy, and
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If you
determine the equipment does cause harmful interference to radio or
television reception (this may be determined by monitoring the interfer-
ence while turning the equipment off and on), you are encouraged to try
to correct the interference by one of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
· Consult the dealer or an experienced radio or TV technician for help.
Radio Frequency Interference Requirements - Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada.
Marking and European Economic Area (EEA)
Products intended for sale within the European Union are
marked with the CE mark which indicates compliance to
applicable Directives and European Normes (EN), as follows.
Amendments to these Directives or EN’s are included.
· Electromagnetic Compatibility Directive 89/336/EEC
· Low Voltage Directive 73/23/EEC
Communication Ports
The ACC-7725 Charging Cradle has two communication ports and
one power jack located on the rear of the cradle. The cradle itself
has no internal or external settings that can be changed.
USB Type A
Connect to a device
(mouse, keyboard, USB drive)
USB Type B
Connect to a PC
(transfer files, software development)
© 2020 AML
2190 Regal Parkway • Euless, TX 76040
800.648.4452 • Local: 817.571.9015
www.amltd.com • 800.648.4452
© 2020 AML
© 2020 AML
2190 Regal Parkway • Euless, TX 76040
800.648.4452 • Local: 817.571.9015