Amity Technology Active Depth Control, Руководство по эксплуатации и каталог запасных частей

Страница: 5 / 29

Figure 1 ‐ HOME SCREEN
B – Wand Depth Indicators
The wand depth indicators show the
instantaneous values of the left and right hand wands. These values are used to
achieve the target depth (Figure 1 – F).
PLEASE NOTE: If either the LH or RH indicators lose complete movement or do
NOT appear to be tracking the target depth (Figure 1 – F), re ‐ calibrate the wands.
(See “M” – Page 7) If the problem continues after re ‐ calibration, check rotary
position sensors for damage.
C ‐ “LOWER HITCH” Button
This button lowers the hitch incrementally. It functions in two
different increments, small and large, dependent on whether the PTO is engaged. If the PTO is
not engaged (non ‐ harvesting) and the button is pressed, the hitch cylinder will move smoothly
in a larger increment. If the PTO is engaged (signifying harvesting) and the button is pressed,
the hitch cylinder will move a small increment each time the button is pressed and will
deactivate the “AUTO” mode.
D ‐ “RAISE HITCH/END ROW” Button
This button has dual functions. This button raises
the hitch incrementally. And, if this button is held for 3 or more seconds, it goes to “END
ROW” mode and raises harvester to its maximum height. PLEASE NOTE: It works on the same
increment and operating premises described above for the “LOWER HITCH” Button.
3