Maxi Linux Remote Control
User Guide
2. Inserting batteries
1. Remote control layout
3. Operation
1
TV input source select
2
TV/AUX power/standby
3
Colour navigation
4
Replay VOD or recorded video
5
Set-top box (STB) PVR* transport
6
Electronic Program Guide
7
Navigation and OK
8
Back
9
Volume up and down
10
Channel select and text entry
11
Go to Live TV
12
Option (mapped by your service
provider)
13
Infra-red (IR) window
14
STB power/standby
15
VOD menu
16
Forward VOD or recorded video
17
Information
18
Exit
19
Menu (for STB)
20 Channel/Page up and down
21
Mute
22
Subtitles/Closed captions
23
DVR /recordings menu
24
Low battery warning LED
Slide the battery
housing cover
downwards to
remove
1
Insert two
AAA batteries
observing the
correct polarity
2
Refit the battery
housing cover
3
Note
: Some functionality may not be available on specific models of STB, also functionality may vary with the TV
service delivered by your service provider.
*Personal video recorder - available on some models of STB
Battery information
When you use the remote control, point it towards the front of the set-top
box (STB). Do not cover the infra-red (IR) window at the front of the remote
control and at the front of the STB.
If you press a key for more than 30 seconds the remote control will stop
transmitting commands to preserve battery life.
Do not mix different types of battery or old and new batteries.
Do not use rechargeable batteries.
Do not attempt to recharge the batteries.
Remove the batteries from the remote control if you are not going to use it for
several weeks, to avoid the risk of leakage.
Please respect your environment and any local regulations and dispose of old
batteries in a responsible manner.
Immediately remove any leaking batteries.
Take care when handling leaking batteries as they may cause burns to the skin
or eyes, or other physical injuries.
