6
AmiNET530 Remote Contr
ol Guide
Controlling the AmiNET530
To control the AmiNET530 press the
STB
button on the remote control. The
STB
mode–select
button will light for one second to indicate that the mode has been set.
When any valid function button on the remote is pressed, the
STB
button will light to indicate that a
command is being transmitted in STB mode.
Switching on or off
To turn the AmiNET530 on or off:
• Press the power button on the Amino remote control.
When the AmiNET530 is switched on the status light on the front panel is on.
Remote Control User Guide 14/11/07 1:36 pm Page 6
