Amino AmiNET 130, Руководство пользователя

Страница: 11 / 14

11
1. Connecting the Amino
It is wise to switch off any devices used in this installation process and
disconnect them from the power source.
a. Connecting the input
Since the Amino receives its IPTV-signal from campusnet (your
internet connection), connect a UTP cable to the “Digital TV
input” and make sure the other end of the cable is connected to
campusnet via a switch.
b. Connecting the TV video
What you need to connect depends on the connection(s) of your
TV. What follows is a list of different connection types, sorted by
quality, best first.
If your TV has an HDMI or DVI connection, you need to
connect it to the “HDMI-output” of the Amino. An HDMI
cable is provided with the box. If you need an HDMI to DVI
cable you can get it from us.
Component video can be connected using the provided cable
and the “A/V out” output of the Amino. If you need a SCART
cable you can get it from us.
Composite can be connected using the provided cable and
the “A/V out” output of the Amino.
A coax cable can be connected to the “RF antenna output” of
the Amino.
c. Connecting the TV audio
There are 3 possibilities:
If you connected your TV using HDMI or coax, your TV already
receives sound. If you used an HDMI to DVI cable, it doesn’t!
If you own an amplifier featuring surround sound, you can
connect it using the “digital audio output” of the Amino.
In all other cases you need to connect to the “A/V out”
output of the Amino using the provided cable to receive
sound.
d. Connecting power
Finally you need to plug in the Amino using the provided cable
and the “Power input” on the Amino.