Amina BackboxSW200 Скачать руководство пользователя страница 10

Further details

07

Removal

In the unlikely event of a problem developing with the product, or you simply wish to remove the item 
to change its location, please refer to the following guidelines:

Locate the speaker by tapping the wall or ceiling listening for a hollow sound compared to the rest of 
the wall/ceiling. Then, with a sharp chisel or decorator’s scraper, carefully chip into the plaster to expose 
a small area of the panel surface. To ensure you do not damage the panel, hold the tool at an acute 
angle to the wall or ceiling.
Now, holding the scraper almost parallel to the panel surface, work outwards towards the product’s 
edge easing the plaster away from the panel. Do not worry if the panel surface receives marks or 
indented scratches during this process (it should not, however, have holes entering through to the 
unique honeycomb panel). Once the product is plastered back into its original or new location, the new 
skim of plaster will cover all these imperfections and the speakers performance will not be unduly 
affected.

Clear the surface plaster material from the surrounding area of wall or ceiling to expose all the joint 
tape and subsequently remove it. Use a narrow chisel or flat blade screwdriver to remove the plaster 
and expose the screws at each corner of the speaker.  Using a suitable screwdriver, remove the four 
screws and then ease the speaker from the wall or ceiling and disconnect the speaker cable.

Next locate the screws fixing the BackboxSW to the wall/ceiling and carefully remove them. Cut away 
any expanding foam from around the sides of the BackboxSW with a sharp knife and pull the 
BackboxSW out of the cavity.

If any products become damaged when removing, please return them to Amina Technologies Ltd 
where the product can be repaired or replaced. 

Содержание BackboxSW200













Отзывы: