Amina ALF120, Руководство пользователя

Страница: 14 / 15

14
Troubleshooting
Symptom Solution
No sound The connections to the ALF120 are very simple, so check for
a settings error or possible fault with the source or amplifier
before investigating connections at the ALF120.
Imbalance between
ALF120 and the
system speakers If the bass sound from the ALF120 is not in balance with the
system speakers, check the subwoofer level settings in the
DSP configuration software. Ensure that the DSP placement
settings (corner, flat wall etc) have been correctly set.
Vibration (in-wall) If the vibration occurs after completion of installation,
disconnect the system speakers and run only the ALF120 (or
just one ALF120 at a time where there are more than one).
Use a slow frequency sweep (from a PC signal generator
or test CD) to identify the problem frequency that excites
the vibration. Set this frequency to excite the vibration
continually, then locate the source by listening closely to the
vibrating area. The source may be a loose wire or pipe in a
cavity that should be tied down or foam wrapped, or a wall
fitted item such as a light.
If you cannot resolve the problem, contact your supplier.
Specifications
Dimensions (H x W x D): 1605mm (63
1/5
”) x 345mm (13
1/2
”) x 118mm (4
3/4
”)
Weight: 17.5kgs (38lbs 10oz)
Design: DTL bass loading
Power Handling: 50W continuous
Nominal Impedance: 6 Ohms
Frequency Response: 27Hz - 120Hz (+/-6dB), 29Hz - 101Hz (+/-3dB),
Sensitivity: 96dB 1m/1W *
Maximum Short term SPL: 110dB @ 1m **
Connection: 3-Way binding post
* Quarter space loading.
** Quarter space (Pi) boundary loading.
Warranty
The ALF120 is designed to operate reliably for many years. Correctly installed and in
accordance with these instructions, Amina warranties the ALF120 against defective
materials and workmanship for a period of one year.