AMIMON CONNEX ProSight, Инструкция по установке и эксплуатации

Страница: 68 / 90

Home Page
Safety
Introduction to CONNEX
ProSight
Opening the Package
Installing the Units
Operating the Units
Configuration Using
ProSight Mobile
Application
Specifications
Appendices
68
Configuration Using ProSight Mobile Application |Home Screen Overview
Doc P/N: 9040962 | Rev 06 | Printed 17 August 2017
Navigation pane
Home Screen Overview
The following information is displayed on the home screen:
• Connection status (1)
• Paired HD receiver name (2) – tap the information icon
i
next to the receiver name to display the device parameters (see
Viewing Device Parameters ).
• Paired Devices (3) – list of receivers that have been paired for
Bluetooth communication in the past
• Around Me (4) – list of other CONNEX ProSight receivers in the
area. Selecting a device that is not already paired requires entering
a pairing code (see Viewing Bluetooth Pairing Code ).
Pairing with a Receiver via Bluetooth
This section shows how to initiate first communication between a mobile
device and the HD receiver.
1. Make sure that Bluetooth on your mobile device is On.
2. Select a device from the Around Me list (see Home Screen
Overview ). A message appears asking you to enter a pin code.
3. Enter the Bluetooth pairing code that appears in the Bluetooth
OSD menu and click OK (see Viewing Bluetooth Pairing Code ).
1
2
3
4
CONNEX ProSight Installation and Operation Guide