DiSEqC 1.2:
On this menu, user can set the antenna to right position by DiSEqC 1.2 command if the antenna supported DiSEqC
1.2 function.
According to the signal strength and quality in percent, the meter can get the best signal by sending command to
adjust antenna to right position.
.
Instructions
Satellite
Show the current selected satellite.
Transponde
r
Show and choose the current transponder of the satellite. Press [
/
] to switch between
transponders.
Move
Press [
/
] to send command to move antenna to East or West by step mode. Press [
/
]
and hold on to send command to move antenna to East or West by continual mode. Press
[EXIT] to send pause command to exit moving progress.
Centre
position
Press [OK] to send command to move antenna to centre position
Set limit
Press [
/
] button to send command to set limitation to move to East or West
Save
Press [OK] to send saving command to save current antenna position for satellite
USALS:
On this menu, user can set the antenna to right position by USALS command if the antenna supported USALS
function.
User can select the local city in the saved cities list. The local longitude and latitude will be set as saved in the
meter once the city sets. Or user can press [OK] to edit the local longitude and latitude manually if the city sets to
customized.
Press [1] to send command to move antenna to the right position.
Press [2] to send command to move antenna to centre position.
11
