Amika The CEO, Руководство по эксплуатации

Страница: 4 / 18

@amika
Operating Instructions - US only
This appliance is intended for household use.
Use on Alternate Current (60 Hertz) only.
This appliance has a polarized plug (one blade is wider than the other). As a safety
feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a qualified technician. Do not
attempt to defeat the safety feature.
CHECK ALCI EVERY TIME YOU USE THIS HAIR DRYER
This hair dryer is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a
safety feature that renders it inoperable under some abnormal conditions, such as
immersion in water. To make sure the ACLI is functioning properly and the exclusive
water sensing system (ALCI) is working, perform the following test:
Should the dryer go off and the Reset button pop out during use, this could indicate a
malfunction in the dryer. Remove the plug from the outlet and allow the dryer to cool.
Reset the ALCI. Reinsert the plug into the outlet. The dryer should function normally. If
not, return it to a service center for examination and repair.
Reset
Test
1. Plug in the hair dryer and press
test button on plug.
2. Hair dryer will stop working. There
will be an audible click and the reset
button will pop out.
3. To reset ALCI with a Reset button:
Unplug unit. Then push Reset button
in, and reinsert plug into outlet.
4. Be sure to repeat test every time you
use this hair dryer to confirm the ALCI
is operational.
5. If ALCI is not functioning properly,
return the hair dryer to a service
center.
6. If a water immersion occurs, bring
this unit into a service center. Do not
try to reset.