www.amico.com 15
Worktop Height Adjustment
WARNING:
ADJUST HEIGHT WITH CAUTION IF THERE IS NO LOAD ON THE CART, AS GAS SPRING MAY MOVE
UPWARDS SUDDENLY WHEN LEVER IS RELEASED. DO NOT ADJUST HEIGHT WHILE CART IS IN MOTION.
NOTE:
At ideal operating height, the operator’s forearms should be parallel to the floor when using the keyboard/
mouse (90° bend at elbows).
WARNING:
KEEP LOAD WITHIN SPECIFIED RANGE AS NOTED BELOW. FAILURE TO DO SO COULD RESULT IN
DAMAGE AND/OR INJURY.
1. Lift the Height Adjustment Lever to activate the vertical adjustment mechanism
(Figure 1)
.
2. Grasp the sides of the Work Surface and push down while holding the Height Adjustment Lever to lower the
Work Surface.
3. Grasp the sides of the Work Surface and pull upwards while holding the Height Adjustment Lever to raise the
Work Surface.
4. Worktop Height adjustment range is 15" (38.1 cm)
(Figure2)
.
Figure 1
Figure 2
Adjustments
15" (38 cm)
Worktop Height
Adjustment Range
