![Amico Gamma 40 LED Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/amico/gamma-40-led/gamma-40-led_operating-and-maintenance-instructions-manual_2932941006.webp)
6
Amico Lighting Solutions
Saftey Instructions
• Do not cover the light with a cloth or similar material while operating.
• If problems are encountered that have not been addressed in these operating instructions, please contact
your supplier in the interest of your own safety.
• Do not place the fixture such that it is difficult to remove the power cord.
Please keep these operating instructions in a secured place near the device. This ensures easy access
to safety instructions and important information should the need arise.
• The inspections and maintenance work, as described on page 13, should only be done by trained service
technicians. Anyone else is not authorized to perform inspections and maintenance work.
• The adjustment work should only be carried out by a hospital technician or someone with similar
qualifications. Anyone else is not authorized to perform adjustment work.
• This equipment has been built accordingly and is operationally safe. Nonetheless, it may still present some
danger, especially if not used according to the operating instructions as specified in this manual.
• Modifications are never to be made for any reason. This is to ensure safety for all persons involved. Any
modifications made to the system void the warranty.
• The contents of the operating instructions are subjected to change without notice.
Specific fitting instructions for the Gamma LED Floorstand
• Mounting material not included in delivery.
• The floorstand may be fitted to wall only with a concrete strength of B25 (C20/25) or greater.
• Contact with reinforcing elements of the solid slab ceiling must be avoided. In case of doubt, a structural
engineer should control the mounting on the respective surface.
• The drill holes should be made by a skilled person in accordance with the drill hole tolerances recommended
by the manufacturer of the fastening anchors.
• The screws must be carefully tightened using a torque wrench in accordance with the recommendations of
the manufacturer of the fastening anchors.
Gamma LED Floorstand
• Mounting material not included in delivery.
• The necessary technical information can be found in the installation section of this manual.