Amica ZIV413 Скачать руководство пользователя страница 24

Страница: 24 / 28

If the programme won’t start

•

Check if the plug is connected.

•

Check your indoor fuses.

•

Be sure that the water inlet tap is turned on.

•

Be sure that you have closed the machine door.

•

Be sure that you switched off the machine by pressing the Power On / Off button.

•

Be sure that the water inlet filter and the machine filters are not clogged.

If detergent residues are left in the detergent compartment

Detergent has been added when the detergent compartment was wet.

If water is left inside the machine at the end of the programme

•

The water drain hose is clogged or twisted.

•

The filters are clogged.

•

The programme is not finished yet.

If the machine stops during a wash operation

•

Power failure.

•

Water inlet failure.

If shaking and hitting noises are heard during a wash operation

•

Dishes placed incorrectly.

•

Spray arm hitting the dishes.

If there are partial food wastes left on the dishes

•

Dishes placed incorrectly into the machine, sprayed water did not reach related places.

•

Basket overly loaded.

•

Dishes leaning against one another.

•

Very small amount of detergent added.

•

An unsuitable, rather weak wash programme selected.

•

Spray arm clogged with food wastes.

FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE

Содержание ZIV413





























Результаты поиска

Содержание ZIV413

Отзывы:

Похожие инструкции для ZIV413

Бренды по названию

Популярные бренды

Amica ZIV413, Инструкция по эксплуатации

Результаты поиска

Содержание ZIV413

Отзывы:

Похожие инструкции для ZIV413

Бренды по названию

Популярные бренды