14
DISPLAY AND CONTROL PANEL
1.
Programme selector dial
1. Press the [On/Off] button.
2. Rotate the programme knob to select the desired programme.
3.
Select the [Delay], [Anti-Crease] or [Gentle] optional functions for additional option.
4. Press the [Start/Pause] key.
2.
Display
Only indicators (DELAY/REMAIN) relevant to the phase that is currently being carried out
will remain on the display during the drying process.
When the drying cycle begins, [REMAIN ] will indicate the remaining time [x:xx] until the
drying cycle completes. The dash “-’’means “Standby” status. You can press any buttons
to resume the programme or open the door.
3.
Indicators of progress of the program
The four LED lights indicate the status of the drying programme.
4.
START/PAUSE button
Press
Start/Pause
to start or pause a programme.
When this button is pressed, this machine is switched between start and pause.
5. Anti-Crease button
The “Anti-Crease” phase time is the last 30 minutes (default) or 120 minutes (selected)
of the drying cycle. When the anti-crease function is selected, the anti-crease LED
indicator will illuminate on the display, and the drum will intermittently rotate during the
drying programme to make sure, the sensitive textiles will not crease. The function can
be selected for all programmes, except [Warm], [Cool] and [Refresh].
6. Gentle button
You can select this function in all programmes except “Refresh”, “Cool” and “Warm”.
20 minutes will be added to the programme and the gentle LED indicator will illuminate
on the display. The programme temperature will be reduced to protect sensitive textiles,
such as acetate, elastane and etc.
7. On/Off button
On/Off button has the on and off function. When this button is pressed, this machine is
switched between on and off.
