Amica VM 7011, Руководство по эксплуатации

Страница: 16 / 18

16
Appliance components (Fig. 1, item ...)
1. Handle
2. Hose connection opening
3. Front cover
4. Speed control button
5. Cable rewind button
6. LED display
7. ON/OFF button
8. Big wheel
Attachments (Fig. 2. item...)
(9) Parquet brush 1
(10) Suction for slots 1
(11) Books brush 1
(12) Small brush 1
(13) Remote control handle 1
(14) Telescopic tube 1
(15) All­purpose suction brush 1
(16) Holder 1
(17) Big turbo brush 1
(18) Textile bag 1
DESCRIPTION OF THE APPLIANCE
OPERATION
Preparing for vacuuming
Always unplug the appliance before attach -
ing or removing attachments!
l
Attaching flexible hose: insert the hose end into
the inlet port and turn it clockwise until feels the
resistance and it stops (Fig. 3, item 1).
l
Removing the hose: holding the hose end, turn
it to the left until it releases and pull the hose out
of the inlet hole (Fig. 3, item 2).
l
Connect the telescopic tube with the hose (Fig.
3, item 3) and the proper attachment (Fig. 3, item
5), slide open the telescopic tube to a suitable
length (Fig. 3, item 4).
l
Grab the plug and pull the power cord while
holding the appliance body, plug into a power
outlet.
l
Before you start vacuuming, extend power cord
cable to sufficient length and insert the plug into
the wall socket. The yellow mark on the power
cord indicates it is extended almost all the way.
When you see the red mark do not pull the power
cord any further.
l
Switch on the appliance with the on / off button.
(Fig. 3, item. 6).
l
After finishing using the appliance, press the on/
off button to turn off the vacuum cleaner (Fig. 3,
item 6).
l
Unplug the cord from the wall outlet.
l
Retract the power cord by pressing cord re -
tractor button (Fig. 3, item 7). For this opera -
tion hold the cord to prevent it from tangling or
bumping the plug on the vacuum cleaner hous -
ing.
l
Disconnect the suction ­ cleaning head from
the tube and disconnect the telescopic tube
from the hose. (Fig. 3, item. 3, 5).
l
Close the telescopic tube (Fig. 3, item. 4).
The vacuum cleaner may be stored in a vertical or
horizontal position. The hose can remain attached
to the vacuum cleaner, but please be careful not to
bend it too much during storage.
CLEANING AND MAINTENANCE
Replacing the dust bag
Before replacing the dust bag, remove the
power cord plug from the wall outlet. Al -
ways use the vacuum cleaner with a fitted
dust bag. If you forget to insert a dust bag
or it is fitted incorrectly, the cover cannot
be closed completely ­ fix the position of a
dust bag and close the cover
1. After disconnecting flexible hose, open the front
cover by lifting it upwards (Fig. 3, ittem 8, 9).
2. Release the dust bag lock and remove the bag
from the guides, if filled with dust.
3. Insert a new or empty dust bag by sliding it into
the guides.
4. Close the cover by pressing it down until it clicks.
If the dust bag full indicator (Fig. 1, ittem
6) goes on, check whether the suction
brush or the cleaning head, hose or tube
is not blocked with large items stopping
the air flow. After removing the items, if
present, restart the vacuum cleaner ­ if
the dust bag full indicator is still red,
replace the dust bag with a new one.