Amica Quatro Slim Island 90, Инструкция по эксплуатации

Страница: 8 / 12

8
2. Operation
2.1 Control panel.
Operation of the hood can be controlled by means of a combined switch (Fig. 6)
-
„+”- hood on
- „-” - hood off ,
- „T” – switch-off timer – TIMER
- „L” – lighting on / off.
2.2. Program function
Timer function:
K
itchen extractor hood IH 17115 – Quatro Slim Island is
equipped with the option of programming automatic switch-off of the hood fan in 10-
minute intervals, up to maximum delay of 90 minutes. Timer” is actuated by pressing
„T” button during operation of the hood with the required fan speed. The display will
flash and a dot will appear indicating that the device is in the switch-off time
programming mode. Then you can program the time of automatic switch-off of the
hood motor using + button, keeping in mind that the figure shown on the display
multiplied by 10-minute time interval indicates the motor switch-off delay (e.g.: 1=10
minutes, 2=20 minutes, 3=30 minutes etc.).
After setting the delay it has to be confirmed by pressing T button again. The display
will stop flashing and will show the previously set speed, and the pulsating dot will
indicate that the time to switching off of the hood motor is being counted.
TIMER function can be cancelled by pressing T button again during counting of the
time.
NOTE: The program always memorizes the last delay setting.
TIMER function has to be actuated within 20 seconds, otherwise the hood will
return automatically to normal operation.
The microprocessor system may get deleted or crash during momentary voltage
drops in the network, and stop responding to commands from the keyboard. In
such case the hood has to be disconnected from and then connected again to the
power network in order to reset the system.