15
OPERATION
Control panel
• All the indicators will go on for a brief moment when the cooktop is connected to the mains.
The appliance is ready to work.
• The cooktop is equipped with an electronic touch button control panel. Press the suitable
button for at least 1 second to activate the requested function.
• A brief tone sounds each time a touch button is touched.
Note: do not put any objects on the touch panels. Risk of triggering error alert.
The touch panel should be maintained clean.
Turning on a burner
Once the cooktop has been activated with the ON / OFF button (
1
), you can proceed with
setting the burners as follows:
1. Select the required burner with burner selector (
2
). ‘0’ will light up in the respective
burner display and its decimal point will flash.
2. Next, you can set the required heating power by pressing touch buttons “+” (
2
) or “-“ (
4
).
The burner will go off if no button is touched within the ten seconds time.
Respective decimal point in the display blinks to confirm that a burner is activated and
ready for parameters input.
Turning on the cooktop
All the burners are cold and indicators are dead when the cooktop is in OFF mode. Touch
the ON / OFF button (
1
) to turn the appliance on. ‘0’ will appear in each burner display and
the decimal point will flash.
The appliance remains active and ready to take in the settings for 10 seconds. The
cooktop will go off if no button is touched within the ten seconds time.
Cooktop cannot be turned on if the children safety lock is active. The key LED sign (
8
)
is on. (see
Unlocking the cooktop
).
Setting the heating power
As long as ‘0’ remains displayed in the burner display (
3
) and the respective digit is blinking,
you can set the required heating power by pressing touch buttons “+” (
2
) or “-“ (
4
).
Содержание PB*4VI510FTB SERIES
Страница 1: ...IOAA 509 10 2010 1 PB 4VI510FTB GB INSTRUCTION MANUAL 2 ...
Страница 26: ...26 ...
Страница 27: ......
Страница 28: ......
