Amica LESTE VM 8100, Руководство по эксплуатации

Страница: 22 / 25

22
Appliance components (Fig. 1, item ...)
1. Handle
2. Power button
3. Lower cover
4. Nozzle
5. Dust Bin Cover Release Lever
6. Dust container
7. Filter cover
8. Li-ion battery
9. Charging port
10. Dust container release button
11. Detachable hand vacuuml
12. Release button for hand vacuum
13. Tube
14. Release button for floor nozzle
15. Electro brush
16. Backlight LED electro brush
17. Wheels allowing the vacuum cleaner to stand
alone.
DESCRIPTION OF THE APPLIANCE
Attachments (Fig. 2. item...)
(1) Tube 1
(2) Wall mount 1
(3) Charger 1
(4) Crevice tool 1
(5) Suction for upholstery / sofa 1
(6) Roller 1
(7) Electro Brush with LED backlight 1
Easy assembly
l
Slide battery onto hand vacuum until firmly
attached (Fig. 3, item 1).
l
Slide wand onto hand vacuum until it clicks (Fig.
3, item 2).
l
Push tube into motorized floor nozzle until it
clicks (Fig. 3, item 3).
How to install wall mount
l
Choose location near power outlet. Locate point
high enough on wall to allow wand and motorized
floor nozzle to hang freely.
l
Place mount against wall and use pencil to mark
drill holes.
l
Drill holes and insert drywall anchors. Insert
screws through holes on mount and tighten until
firmly attached (Fig. 3, item 4).
How to charge battery and store accessories
(Fig. 3, item 5).
l
Place assembled vacuum cleaner on wall mount.
l
Plug charger into power outlet and then into
charger port on hand vac.
l
Loop charger cord into clips on sides of wall mount.
l
Snap tool(s) into tool storage areas.
Battery indicator lights show level of charge
(Fig. 3, item 5).
l
Indicator lights stop blinking when fully charged.
l
Charge battery fully before using for the first time.
This may take up to 4-6 hours.
Discharging time:
At maximum power level: about 10 minutes
At medium power level: approx. 25 minutes
At the lowest power level: approx. 60 minutes
Operation
l
Knob down ”Power button” to start
l
Knob down “Power button” again to stop
l
When only one power indicator is on and twinkle,
please charge it.
l
The tube can be bent when needed. Pull the tube
sleeve upwards along the arrow, then the tube
will be bend (Fig. 4, item. 1).