16
OPERATION
Before using the oven for the first time
Remove packaging, clean the interior of
the oven,
Take out and wash the oven fittings with
warm water and a little washing-up liqu-
id,
Switch on the ventilation in the room or
open a window,
Gently press the knob and turn it right to
position
or
(see section: elec-
tronic programmer operation and oven
control),
Heat up the oven (to a temperature of
250°C for approximately 30 minutes),
remove any stains and wash the interior
carefully.
The oven is equipped with a retractable
knobs. In order to select a function do the
following:
1. Gently press and release a knob which
will pop out,
2. Turn the oven functions selection knob to
the desired function.
Symbols printed around the knob indicate
available oven functions.
1
2
Important!
To clean the oven, only use a cloth
well rang out with warm water to
which a little washing-up liquid has
been added.
The electronic prgrammer Ts is
equipped with electronic sensors which
are switched on by touching or press-
ing the sensor surface for at least one
second.
Each sensor reaction is confirmed by
the beep.Keep the sensor surface clean
at all times.
Important!
In ovens equipped with the electronic
programmer Ts, the time “
0.00
” will
start flashing in the display field upon
connection to the power supply.
The programmer should be set with
the current time. (See
Electronic
programmer
). If the current time
is not set operation of the oven is
impossible.
Содержание EHIX 30.1
Страница 13: ...13 30mm min 650mm 5 10 mm INSTALLATION ...
Страница 54: ...54 INSTALLATIE 30mm min 650mm 5 10 mm ...
Страница 84: ......