
73
FAULTS AND TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
No frothed milk is dispensed.
The Automatic Milk Frother is
dirty or incorrectly assembled
or installed.
Clean the Automatic Milk Froth
er and make sure it is properly
assembled and installed.
No frothed milk is dispensed
The opening in the milk tube
connector is blocked with milk
residue.
See the “Daily Cleaning”
section. Follow the instructions
“Clean the milk container and
the milk container connecting
tube." Clean the connector and
make sure the entire connector
opening is clean. Use a needle
or a bristle brush to clean the
opening.
The opening in the milk tube
connector is blocked by stub
born milk residue.
The milk tube connection has
not been cleaned for a long
time.
Soak the milk connection tube
in warm water for one hour. Fol
low the instructions for “Clean
the milk container and the milk
container connecting tube” in
the "Daily Cleaning” section.
Use the milk frothing function to
clean the appliance until clean
water is dispensed from the
spout. Clean the opening with a
needle or a bristle brush.
The type of milk used is not
suitable for frothing.
Various types of milk have
different properties and yield
different quantity of froth. Semi
skimmed or fullfat milk yields
good results.
The temperature of the milk is
too high.
No frothed milk is dispensed.
The milk is splashing on the
table
The milk dispensing tube is not
attached
The frothed milk jets out of the
dispenser.
The descaling indicator flashes
even after the descaling pro
cess is completed.
The descaling process is not
complete.
Wait for the process to com
plete. The appliance turns off
automatically. Do not turn off
the appliance manually.